Drying capacity directly affects the rate of production. How to improve the drying speed and drying efficiency is also a hot topic that equipment users and manufacturers pay close attention to.
Hot air drying has three important factors: drying temperature, drying time, drying wind speed.
1. As the drying temperature increases, the drying efficiency will increase rapidly. When the temperature rises above the boiling point of the liquid, the drying rate will tend to be flat. At the same time, the drying temperature also depends on the deformation temperature and specific technological requirements.
2. Drying time refers to the time of materials passing through the oven. The longer the drying time is, the better for drying.
3. With the increase of hot air speed, the drying speed of materials is accelerated; The higher the wind speed, the shorter the drying time required. Therefore, on the premise of not affecting the quality of materials, increasing the hot air speed is an effective way to improve the drying speed.

In the process of industrial production, people generally adopt the following cooling methods, which are: air cooling, water cooling, heat pipes and other heat dissipation.
1. Choose the most suitable cooling method according to the characteristics of materials and production process.
2. Optimize the cooling path on the premise of ensuring the quality of materials.
3. Increase the contact area, extend the cooling time and improve the cooling effect.