What are the requirements for the pneumatic conveying system?

Pneumatic conveying is the preferred method for automatic conveying of powdery materials. Conveying pipeline is an important part of pneumatic conveying system. The size and material selection and design of conveying pipeline will affect the effect of material conveying.

 

 

 

Pneumatic conveying system

 

 

 

The turning radius of conventional pneumatic conveying system is 1.5 meters in general, and the minimum standard is 1 meter. Wear resistant materials should be used in the bending of the pipeline, fixed supports and sliding supports should be installed in the pipeline, and the interface between the pipeline and the valve should be smooth and without uneven phenomenon.

 

 

 

When the pipe is connected to the main pipe through the branch pipe, it is usually connected horizontally or top-down. Unfavorable use bottom-up means, also unfavorable use perpendicular downward, horizontal backward decorate. The horizontal pipeline length should not exceed 300 meters when the pipeline is arranged. When the horizontal pipeline length exceeds 200 meters, the direction of the pipeline can be changed.

 

 

 

The pneumatic conveying pipe can rotate and lift vertically on the horizontal plane at will, and the end of the conveying pipe can be arranged vertically downward. When the pipe tilts due to the local shape conditions, the tilting Angle should not be more than 5 degrees. Stainless steel pipes should be used if the material is corrosion resistant.

 

 

 

The above are the requirements of conventional pneumatic conveying system for conveying pipes. If there are special customized conveying requirements, reasonable design of the pipes should be carried out according to the actual situation, and the influence of the nature of materials should be considered to avoid damage of the conveying pipes. D masterpiece for domestic large-scale material automation manufacturers, can undertake the field of pneumatic conveying system customized to build!